What to do with a blue screen of death on a computer?


27 Nov

Who among the users did not flinch when they saw on their monitor instead of the usual greeting Blue Screen of Death, in other words, the blue "screen of death"? For the brave and determined, we offer BSoD elimination tips. First, let's find out what it is. The threatening title accompanies an error line written in white on a bright blue background.


The main reasons for action in BSoD

Let's start with the reasons that led to this trouble. They may be different, but the result alone cannot work normally. So, these can be: problems related to RAM; incorrect operation of drivers; hard disk problems.

Dell SonicWall VPN Engineers must have the analytical skills to determine the right course of action to resolve issues, such as encrypted threats and ransomware attacks. 


What steps should be taken:
Check RAMWhen testing RAM, you should use the Memtest86 + program yourself
For 9 stages, you will complete the check, and when passing each stage, the information ***** Pass complete, no appears at the bottom of the screen (and in case of errors, their number is indicated). By pressing the Esc key, you can terminate and exit the utility. If errors are found, take out the RAM ruler, check it for cracks or chips, clean the contacts with a hard eraser from dust and dirt. Then, by inserting the bar, you can test it again. If the malfunction persists, then there are two ways: replace the RAM or ask for help from specialists.

Test the integrity of system files.


If you can work with the RAM yourself, then checking the HDD- a responsible procedure, because the alignment can be very different: you can fix the hard drive, but at the same time spoil the operating system or irrevocably lose data; and in the most unpleasant variant, the disc itself may be ruined.
If BSoD appears not at boot, you can try to check the integrity of the system files yourself.

For Windows, you should take the following steps: find the "Run" button in the "Start" menu, then write "cmd" in the field, make an entry sfc / scannow and click OK. These sequential actions start the System Files Protection Wizard. In the future, you will need to insert the installation disk with the distribution kit, click on "Retry", and upon completion of the process, restart the computer.

For Windows 7 and Windows 10, the work algorithm looks like this: as an administrator, start the command line and select "All Programs" from the "Start" menu. Open "Accessories" and select "Command Prompt". Right-click on it and go to "Run as administrator".
It is also worth noting that the blue screen (bsod) very often occurs due to conflicting driver versions in the system. Device drivers should be updated in time .
If you have a password, enter it and click "Continue". In the field that opens, type sfc / scannow and click Enter. When the wizard finishes, restart your computer.
If the problem with the blue screen cannot be solved, you can always contact our service center for computer help.

Comments
* The email will not be published on the website.
I BUILT MY SITE FOR FREE USING